Techniques for Applying Satin Finish Paint.. When you make the decision to paint a wall, door or the wood siding of your home. You must consider many factors and techniques that determine the success or failure of the project. Research and preparation is the key to doing the job right the first time and saving the time. effort and cost of doing it a second time. Satin-finish paint is often used because it is simple to work with. And produces good results while offering many choices of paints for the type of surface you are painting.
What is Satin-Finish Paint?
Satin finish paint is available as oil based or latex paint for interior or exterior applications. It reflects light producing a medium-gloss that shines noticeably more than matte, flat or eggshell finishes. However less than high-gloss paints. Satin-finish paint responds well to washing and the smooth texture makes stain removal simpler. Satin-finish brushes or rolls on with a velvet smooth texture. It is more durable than lower-gloss paints, fits well on higher traffic.
Satin-Finish Paint Uses
Satin-finish paints are use on doors, trim, windows and ceilings. These paints are also suitable for walls, hallways, kitchens, bathrooms and children’s bedrooms. Satin-finish paints are washable and clean up with little effort. Exterior window and door trim as well as wood and aluminum siding, stucco and concrete are painted with satin-finish paint because it holds up well to weather and resists chipping and peeling.
Preparing the surface properly — and avoiding paint failure — is the first and most important step on a painting project. Paint failure occurs when recently applied paint begins to crack, peel or flake off the painted surface. A slick, glossy surface must be sanded and one which is greasy or dirty needs washing in order to provide an acceptable surface for paint to adhere to. Imperfections on the wall such as crevices, nail holes and bumps are very noticeable after painting and must be filled and sanded before painting. It’s essential to spend time to prepare the surface properly. Poor surface preparation results in paint failure which costs time, effort and materials — especially since the surface must be repaired and repainted.
Primer provides a smooth, even surface paint adheres to easily. There is not one type of primer for every type of surface. Choosing the correct primer for the surface you are painting ensures an acceptable outcome for your project. The primer goes on with the same types of brushes or rollers and in the same manner as the paint. It’s just as important to apply a smooth, even coat of primer as it is to apply a coat of paint. The primer needs sanding after it dries and sanding dust cleaned from the surface before painting.
Paint and Applicator
Carefully consider the type of surface you are painting and the paint that works best on that surface. After determining the correct type of paint, consider the applicator you use to apply it. Oil-based paints are usually applied with a natural bristle brush while latex works well when spread with a synthetic nylon or polyester brush. The size of brush is also important. Generally, brushes that are 3 to 4 inches wide work well for larger areas while a 2- to 3-inch angled trim brush is right for interior or exterior trim work.
Techniques for Applying Satin Finish Paint.. Select the paint that is appropriate for the surface you are painting in order to avoid paint failure. Consider adding a thinning and smoothing agent in order to make it go on effortlessly and evenly. Mixing the paint correctly, applying it with the proper brush or roller and doing so with the correct technique ensures an acceptable paint job. Long, smooth strokes of the roller or a 3- to 4-inch-wide brush to produce the best results on larger surfaces. Before the paint begins to dry, use the roller or brush to smooth the overlap areas to prevent thick buildups of paint. A thick paint requires only one coat, while a thinner paint needs light sanding and dusting and the application of another coat.